Nes5

Nes5

Tight Space Thread Restorer​

  • Special new design for tight places.
    As little as 16mm (5/8″) clearance around the bolt is needed.
  • One tool for inch or metric
  • No calibration required
  • Self adjusting to any pitch and size within range
  • Automatically chases good
    threads to repair the damage
  • Nes Range M10 – M18 3/8″ – 11/16″
    Pipe threads 1/8″ – 3/8″
  • M-MF UNC-UNF NPT 60°
  • Cat No. 06250
Pat. Pend.
nes5-img1
nes5-img2

How to use the nes 5?

open

Turn knob (K) to expand the blades’ carrier (B). Place Nes5 over thread to be repaired.

close

Turn knob (K) to move the blades into grooves of thread, and tighten by hand only. 

turn

Rotate the Nes5 tool by the cross-rod in direction of the arrow only.